Новый разбрасыватель жидких удобрений POMOT T 546/1

новый разбрасыватель жидких удобрений POMOT T 546/1
Фото: новый разбрасыватель жидких удобрений POMOT T 546/1
1/7
Сравнить В избранное PDF
16 650 €
≈ 19 915 $
≈ 1 146 994 руб.
Марка POMOT
Модель T 546/1
Тип разбрасыватель жидких удобрений
Объем 13 м³
Место расположения Польша Zgorzelec
Дата размещения более 1 месяца
Номер в стоке продавца top59
Autoline ID AE12170
Реклама
Дополнительная информация: английский
Capacity: 13 000 L
Product offered by Top-Agro is covered by EU warranty!
CE certificate!
NEW slurry tank brand POMOT
capacity 13000 liters
Type T 546 / 1
Type T546 / 1
capacity 13,000 liters
biaxial spring chassis with TANDEM frame construction
Technical and operational data
length 7610 mm
width from 2535 to 2550 mm
height from 3019 to 3250 mm
with tires 500/60 x 22,5
550/60 x 22,5;(depending on version)
a number of axis two spring axles or TANDEM (central axle)
wheel track form 1850 to 1900 mm
emphasis on the hook 16 kN
13000 liters capacity
curb weight 4600 kg
total weight 17600 kg
spreading reach
with a spoon max. 14 m
Traktor power 96 kW (130KM)
a time to fill tank by the compressor
KD 12000 max. 5 min
MEC 9500* or KD 10000 max. 6 min
MEC or KD 8000 max. 7 min
MEC compressor 9500 will be available from October 2009
The slurry tank type T 546 / 1 at capacity 13000 liters is a completely equipped machine ready to work. It doesn’t need any additional equipment to work
The vehicle is available in four versions
MINIMUM
STANDARD
CLASSIC and PREMIUM
MINIMUM version has a compressor at capacity 8000 L / min
and a pouring spoon with the splash plate. It has no suction hose 6m
STANDARD version is the implementation of the standard described below
CLASSIC version has larger tires in relation to the STANDARD version and an additional latch side to fill the vehicle
PREMIUM version has larger tires than STANDARD and an additional latch side to fill the tank
oil tank 5 L
a triangular and pto
Specifications and standard equipment
The tank is made of 5mm thick sheet with additional reinforcements
Construction of the slurry tank - frame construction - tank mounted on a frame made from section closed
Tank hot dip galvanized inside and outside. Inside the container pier with reinforcing frames
Painted frame
Wheelset single axle
two wheels 500/60 x 22,5
Compressor with a capacity of 10000 ltr. / min. (flowability of air)
The double-ball valve protecting for overflowing the compressor
Galvanized t overflow tank with sight glass and drain tap
Oil catcher / silencer
Manowakuometr
Lower hitch latch at height of 400 mm
Exchangeable ear hook (screwed)
Mechanically controlled parking support
Float level indicator on the front of the tank
Electrical system 12V connector
The lighting required by the provisions of the Road Traffic
Service brake - one-way
air
Handbrake parking
Hose 6 "(ø 150) of the suction strainer - suction hose length 6 m
Main drain valve with a diameter of 6 " with the hydraulic control
The rear hatch with a diameter of 900mm
Bottling device - spoon shaped pattern poured POMOT 94
filling the width from 12 to 14m
Painted metallic fenders
Pressure and underpressure safety valve
Blanked rear spigots tap 6 "
Two side connectors on the right and left side
one of them is equipped with an inlet tap 3/ 4 "
Certificate of approval - for registration and moving on public roads at speeds up to 25km / h
CE Mark
ADDITIONAL EQUIPMENT
On request
a vehicle can be adapted to move at speed of 40km / h
To facilitate the maneuvering of the slurry tank with this capacity and reduce the marks on turnin back the vehicle can be equipped with rear-wheel steered
The vehicle in frame construction can be adapted to mount the applicator soil fertilization with working width from 2.5 m to 4m. As well as soil fertilization applicator
made in the dragged hoses system (see accessories)
The slurry tank can be equipped with many accessories (see accessories)
Price for version STANDARD
Данное предложение носит ознакомительный характер. Точную информацию запрашивайте у продавца.
Отправить запрос продавцу